Sai Tech Industries
Sai Tech Industries
Kurla West, Mumbai, Maharashtra
GST No. 27AUMPS6677H1ZR
TrustSEAL Verified
Call 0804605875289% Response Rate
SEND EMAIL

Hydraulic Thruster Brake

We are a leading Manufacturer of 150 mm dia electro hydraulic thruster brake with 18kg, 18 kg electro hydraulic thrustor and hydraulic thruster brake from Mumbai, India.

150 MM DIA Electro Hydraulic Thruster Brake With 18kg

150 MM DIA Electro Hydraulic Thruster Brake With 18kg
  • 150 MM DIA Electro Hydraulic Thruster Brake With 18kg
  • 150 MM DIA Electro Hydraulic Thruster Brake With 18kg
Get Best Quote
Approx. Price: Rs 7,950 / PieceGet Latest Price

Product Details:

Minimum Order Quantity20 Piece
Country of OriginMade in India
MaterialCast Iron
Usage/ApplicationEOT Crane
Power90 watt
Drum Diameter5.5 inch
Automation GradeSemi-Automatic
BrandSai Tech Industries

MAKE: SAI TECH INDUSTRIES
INTRODUCTION.
Thruster brake is a device used to recand the speed of moving machinery and to stop acutely to the deseed postson. The making Terce is supled to the brake shoes by stressed crisp the stresses on the rotating brake umetangas speed and finally suit. The releasing of the brake drum and of the sang is dora by thruster
Assembly and Function
A thruster shoe brake has a pair of cast iron toes which are lined up with fiction paths. The shoes are hinged on man arm and aids arm of the brake each of them have a hinge pin head in the bann They are enacted to each dear on top by a ta red, which tu hingad in the main am and iscked to the awal block in the site arm by a lock nam. A crank lever hinged on the main army and the other and fixed to the toples of the trader by a hinge pin hoake springs fixed on the main anm and a pre-oaded by a inceton the leer. The pre-tension in this spring decides the braking turque The thrust is fired on the base by linge on When the theater is not energized, the brake shoes a pressed at the brake dram fimed on the drive motor shaft and hold under the effect of braking force provided by the spring in such condition, the brake is applied and the daw cannot rotate. As the piston travels upwards the angle lever turme, pushes the brake rod and compresses the brake spring smutaneously the lever on the other side of the wheel Brake Drum) reacted. When the first lever reaches the stou on the brake basember the brake lever at the later begs to move, releasing the brake drum
Technical Specification
1] MODEL NO : ST-EHTB/150/18
2] BREAK Torque (KG.M): 9
3] FORCE: 20 Kg
4] STORKE : 51
5] LENGHT/WIDTH/HIEGHT:550/200/450
Features:
1] Rugged design Consistent braking performance
2] Robust in construction
3] Long life
4]Trouble free maintenance.
5] Easy in service

Request
Callback
Yes! I am Interested

18 kg Electro Hydraulic Thrustor

18 kg Electro Hydraulic Thrustor
  • 18 kg Electro Hydraulic Thrustor
Get Best Quote
Approx. Price: Rs 5,500 / PieceGet Latest Price

Product Details:

Minimum Order Quantity50 Piece
Voltage415V
MaterialCast iron
Usage/ApplicationEot Crane
PhaseThree Phase
Stroke Lengths127 mm
Rated Thrust18kg
Output Stroke (S)51 mm
Input Watts90 Watt

Product Description
In line with clients'' variegated requirements, we bring forth a distinguished collection of the Electro Hydraulic Thruster. These products are designed at our ultra-modern manufacturing unit using the superb quality material and progressive technology in conformance with defined quality standards. Being a quality-oriented organization, we assure our clients that these products are excellent on counts of durability and quality.
 
Features:
 
Precisely design
Require less maintenance
Durability
 
Specification:
 
In addition to a wide range of applications in mechanical engineering applications, the thruster operated drum brakes are mainly used in material lifting and handling equipment, mainly because their ''fail-to-safety'' designs ensure safety of men and machines in the event of over failure.
With the advancement in electricl drives and electronics, the drives have pushed the mechanical systems to high level of operations and demanding safer and reliable braking loads moving at much higher speeds than earlier.
Continuous developments in product improvisation and assured quality checks, the thrusters offer compact, reliable yet economical solutions to most of the industrial applications.
 
Assembly and Function:
 
The two main sub-assemblies of the hydraulic thruster, the electric motor and the hydraulic unit are co-axially assembled form the working unit.
In the switched off state (de-energised) the piston is at its lowest position due to external load (as brake spring of the drum brake), and the brake is applied.
When energized, the electric motor drives the pump and delivers working fluid under the piston axially in the guided path, and delivers thrust or force required to operate the attached devise (like thruster brake) via the piston rod and the eye-lug attached to it.
The working stroke can be steplessly controlled by external load.
The thruster is designed for long trouble free service.
The motor windings are designed to meet contingencies.
The bearings are adequately sized.
 
Technical Specification:
Model No.
Force (Kg.m)
Stroke (MM)
RI-EHT-18
18
51
RI-EHT-34
34
51
RI-EHT-46
46
51
RI-EHT-68
68
76
RI-EHT-114
114
76
RI-EHT-226
226
127
RI-EHT-295
295
127

Request
Callback
Yes! I am Interested

Hydraulic Thruster Brake

Hydraulic Thruster Brake
  • Hydraulic Thruster Brake
  • Hydraulic Thruster Brake
Ask For Price
Product Price :Get Latest Price

Product Details:

Usage/ApplicationEot Crane
Power180 Watt
Drum Diameter300 mm
MaterialCast Iron
FinishingPaint Coated
Automation GradeSemi-Automatic
BrandSai Tech Industries
Country of OriginMade in India
Rate Thrust34 kg
Output Stroke51 mm

Request
Callback
Yes! I am Interested
X

Explore More Products

View All Products




Reach Us
Kiran Shete (CEO)
Sai Tech Industries
2,2/3, Doshi Chawl, Indira Nagar, Sunder Baug, Kurla West
Mumbai - 400070, Maharashtra, India
Get Directions


Call Us


Send E-mail