200 MM ELECTRO HYDRAULIC THRUSTOR WITH 34KG Introduction: Thruster brake is a device used to recand the speed of moving machinery and to stop acutely to the deseed postson. The making Terce is supled to the brake shoes by stressed crisp the stresses on the rotating brake umetangas speed and finally suit. The releasing of the brake drum and of the sang is dora by thruster Assembly and Function. A thruster shoe brake has a pair of cast iron toes which are lined up with fiction paths. The shoes are hinged on man arm and aids arm of the brake each of them have a hinge pin head in the bann They are enacted to each dear on top by a ta red, which tu hingad in the main am and iscked to the awal block in the site arm by a lock nam. A crank lever hinged on the main army and the other and fixed to the toples of the trader by a hinge pin hoake springs fixed on the main anm and a pre-oaded by a inceton the leer. The pre-tension in this spring decides the braking turque The thrust is fired on the base by linge on When the theater is not energized, the brake shoes a pressed at the brake dram fimed on the drive motor shaft and hold under the effect of braking force provided by the spring in such condition, the brake is applied and the daw cannot rotate. As the piston travels upwards the angle lever turme, pushes the brake rod and compresses the brake spring smutaneously the lever on the other side of the wheel Brake Drum) reacted. When the first lever reaches the stou on the brake basember the brake lever at the later begs to move, releasing the brake drum Technical Specification : 1] MODEL NO : ST-EHTB/250/18 2] BREAK Torque (KG.M): 20 3] FORCE: 20 Kg 4] STORKE : 51 Features:1] Rugged design Consistent braking performance 2] Robust in construction 3] Long life 4]Trouble free maintenance . 5] Easy in service.
